Company Details

  • Ningxia XingKai Silicon Industry Co., Ltd.

  •  [Ningxia,China]
  • Business Type:Distributor/Wholesaler , Manufacturer , Retailer , Service , Trade Company
  • Main Mark: Africa , Americas , Asia , Caribbean , East Europe , Europe , Middle East , North Europe , Oceania , Other Markets , West Europe , Worldwide
  • Exporter:1% - 10%
  • Certs:ISO9001, Test Report, TUV
  • Description:Activated Carbon for Coke Oven Gas,Coal-based Denitrification Activated Carbon,Denitrification Activated Carbon for Natural Gas
Inquiry Basket ( 0 )

Ningxia XingKai Silicon Industry Co., Ltd.

Activated Carbon for Coke Oven Gas,Coal-based Denitrification Activated Carbon,Denitrification Activated Carbon for Natural Gas

Home > Products > Coal-based Columnar Activated Carbon > Column Denitrification Column Activated Carbon > Coal-based denitrification activated carbon for kinds of gas

Coal-based denitrification activated carbon for kinds of gas

Share to:  
    Unit Price: USD 1250 - 1350 / Ton
    Min. Order: 10 Ton

Basic Info

Model No.: 0.9mm

Artificial Graphite Type: Graphite Electrode Class

Active Carbon Material: Coaly Activated Carbon

Carbon Content: High-Carbon

Pore Diameter: Microporous

Manufacturing Method: Physical-Chemical Method of Activated Carbon

Type: Liquid-Phase Adsorption

Appearance: Cylindrical

Usage: Gold Industry, Petrochemical Industry, Electric Power Industry, Food Industry, Chemical Industry, Environmental Protection Industry

Physical Properties: Specific Surface Area

Chemical Properties: Ph Value

Adsorption Properties: Methylene Blue Adsorption Value

Iodine Value: ≥1000mg/g

Specific Surface Area: >980m2/g

Filling Density: 0.36-0.45g/cm3

Strength: >96%

Blue Methylene Value: 120-150mg/g

Residual Chlorine Adsorption Rate: ≥95%

Additional Info

Packaging: 25kg/bag; 500kg/ton bag

Productivity: 1000000T

Brand: XING KAI

Transportation: Ocean,Land

Place of Origin: NING XIA, CHINA

Supply Ability: 10000T/M

Certificate: ISO9001

Port: Tian Jin

Product Description

Product introduction

Coal-based Column Desulfurization Column Activated Carbon used high quality anthracite as raw material. Adding a certain proportion of adhesive, auxiliary catalyst, by selection, proportioning, grinding, molding, drying, carbonization, activation and deep processing made. This product is mainly used in all kinds of gas, such as water gas, semi water gas, coke oven gas, natural gas, carbon dioxide gas, city gas, synthetic ammonia process gas, and exhaust gas in sulfur dioxide chemical raw materials and other containing mercury. It also used for adsorption of flue gas of power plant equipment, including the removal of sulfur dioxide and saltpeter, which replace the lime desulfurization process before. It also applies to other gas that contains mercury cannot get rid of the low concentration, which is equal to or below the national emission standard.

Coal-based Column Denitrification Column Activated Carbon is cylindrical black particles. It has many characters, such as high porosity, high sulfur capacity, high desulfurization efficiency, large surface area, light weight, strong adsorption capacity, wear resistance, good water resistance, low air resistance, easy regeneration, not easy to break under high pressure etc. It is a commonly used in adsorbent.




0.9 activated carbon


Adsorption purification principle and process

Coal-based denitrification Activated Carbon is divided into large pores (pore size greater than 50nrrt), the middle hole (pore size between 2 ~ 50nm) and micro-pore (pore size less than 2nm) three categories.

The denitrification activated carbon is by active carbon`s adsorption and catalytic activity of activated carbon. The strong catalytic effect of the active carbon for sulfur dioxide in gas, and a small amount of Oxygen in the oxidation reaction, the reaction of elemental S adsorbed the surface of activated carbon. When activated carbon desulfurization agent the adsorption reaches saturation, the desulfurization efficiency decreased obviously, it must carry on the regeneration. The regeneration of active carbon adsorption depends on the material, sulphur began to melt under atmospheric pressure is 190 degrees, 440 degrees Celsius will sublimate into gas, therefore, the general use of superheated steam temperature of about 450-500 degrees Celsius for the regeneration of activated carbon desulfurization agent. When the desulfurization agent reach high temperature, the elemental sulfur separate out activated carbon, the precipitation of sulfur into sulfur recovery pool, water cooled to form solid sulfur.


0.9 activated carbon

Transportation and Packing

Woven bag, lined with plastic film bags, each 25kg can also be packaged according to customer demand. The product should be placed in a cool and dry place during storage; When transportation, it prevents to mixed with hard materials, to prevent carbon particles broken that affecting the quality of packaging, to prevent breakage. To avoid leakage or mixed with debris; to avoid water, oil and fire.

Industry

Certification

Equipment

Packing and Transportation

Contact Information

Looking for ideal Activated Carbon for Coke Oven Gas Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Coal-based Denitrification Activated Carbon are quality guaranteed. We are China Origin Factory of Denitrification Activated Carbon for Natural Gas. If you have any question, please feel free to contact us.

Product Categories : Coal-based Columnar Activated Carbon > Column Denitrification Column Activated Carbon

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
JOYCE JIN Ms. JOYCE JIN
What can I do for you?
Contact Supplier